Hypro Duo React Twin Valve Nozzle Body Electro-Pnuematic Version

Not rated yet
0

.

  • £218.80
Qty:  

Hypro Duo React single outlet on one side and manually rotatable four way turret on the other in a compact, lightweight assembly.
Incorporates two fast-acting electro pneumatically actuated valves to select either or both outlets.

Requires suitable switch to be installed in the cab.
Fail safe valve design with air to open, stainless steel springs to close.

Eliminates the need for twin spraylines or ‘back to back’ configurations.

Compact design to fit available spray boom space. Hinged clamp options; 1/2", 3/4", 1", 20mm and 25mm

Practical Applications

Provide a permanent home for a liquid fertiliser dribble bar

Fit two different sizes of liquid fertiliser nozzles for a wider range of application rates. Operate each singly then both together;
For example; a red (04) and a grey (06) offer a five fold application range
Suitable controller can select outlet(s) and pressures to apply variable rates across field

Makes an alternative nozzle readily available and easily selected;
Save time switching between the most commonly used nozzles
Switch between standard and drift-reducing nozzles as spraying conditions change in the field
Comply with label requirements by switching to LERAP 3 star rated nozzles to eliminate water course buffer zones
Switch nozzles on the move in the event of a blockage
Response time 0.1 seconds to open and close

Specifications and Dimensions

Please see product downloads above for full operating and use instructions
Male bayonet for fitting EF3 type caps (Hypro®, Teejet®, Arag®, Geoline®, Agrotop®, Lechler®)
Each outlet has a flow capacity of 6.0 lpm (equivalent to size 15 nozzle) with negligible pressure drop
Normally closed up to 10 bar liquid pressure
3/8” (9.53 mm) feed spigot to fluid pipe
0-50°C operating temperature (-40 to 80°C dry storage)
Waterproof to BSEN60529 (IP65). Tolerant to typical UV, dust, vibration and impact likely to be encountered in an an agricultural spraying environment
For use as a section control valve, actuating up to 7 pneumatic slaves
Flow to each nozzle individually controlled by 12 VDC signal (normally closed)
Tyco AMP superseal 4-way electrical connector
Low current draw (just 0.25 amps for each solenoid)
Surge protected, range tolerated 9-16 VDC
Response time controlling 7 pneumatic slaves; 0.1 seconds to open, 0.3 seconds to close
Dry weight 343 g
Push-fit air connectors; 6 mm inlet, 4 mm outlet

 

 

 

    • Weight
      0.35 kgs
    • SKU
      4214-2502V
  • Manufacturer
    Pentair Hypro
  • MPN Exists? (TRUE / FALSE)
    FALSE
  • Brand
    Hypro
  • Google Product Category
    Business & Industrial > Agriculture
  • Agratech Product Type
    Nozzles
  • Nozzle Holder Pipe Size
    4214-2502V 1/2" Duo React Electic/air, 4214-2503V 3/4" Duo React Electric/air, 4214-2504V 1" Duo React Electric/air, 4214-2507V 20mm Duo React Electric/air, 4214-2508V 25mm Duo React Electric/Air
To replace this text with your store's actual shipping info, go to "Catalog -> Product tabs" and edit the Shipping info page.

We accept the following payment methods:

To replace this text with your store's actual info on payment methods, go to "Catalog -> Product tabs" and edit the Payment methods page.

This page is intended for your policy regarding returns and refunds.

Here you can provide information as to what products can be returned, how many days your customers have to return their purchase, whether they will receive a refund in the original form of payment, a replacement or a store credit, who pays for the shipping of the previously purchased products to the store, and so on.

To replace this text with your store's actual return policy, go to "Catalog -> Product tabs" and edit the Return Policy page.
Customer reviews
There are no reviews yet. Be the first to leave a review.
Please sign in to add review

Which Size Nozzle Holder Fits My Sprayline ?

Nozzle Holder Pipe Sizes

The sizes as listed refer to the Nominal Bore of the pipe and not the Outside Diameter. Please follow the sizing below to determine which size of nozzle holder you require. Please allow a tolerance, either direction of the sizes below, as some pipe sizes may vary slightly from the dimensions below.

Nozzle Holder Size To Fit Outside Diameter Pipe

1/2" Nozzle Holder will fit 19 - 21mm (Approx) Outside diameter of pipe

3/4" Nozzle Holder will fit 25 - 27mm (Approx) Outside diameter of pipe

1" Nozzle Holder will fit 31 - 33mm (Approx) Outside diameter of pipe